members of the European Federation of Interior-Landscape Groups 
Back to Home Page 
| INTERIOR LANDSCAPING PRODUCTS |
|
|
| members of the European Federation of Interior-Landscape Groups |
||
| Back to Home Page |
|
|
|
| Renus Brass Snap Couplings | xxxxxxxxxxxxxxxx | xxxxxxxxxxxxxx | |
| Simple twist coupling (Geka) for 1/2” and 3/4” hose |  |
||
| Hosetail 1/2” | £1.25 ex VAT | £1.47 inc VAT | |
| Hosetail 3/4” | £1.35 ex VAT | £1.59 inc VAT | |
| Male 1/2” | £1.26 ex VAT | £1.48 inc VAT | |
| Male 3/4” | £1.37 ex VAT | £1.61 inc VAT | |
| Female 1/2” | £1.26 ex VAT | £1.48 inc VAT | |
| Female 3/4” | £1.44 ex VAT | £1.69 inc VAT | |
| Brass “Click” Connectors | |||
| Compatible with most 1/2” interchangeable hose fittings these brass fittings are more crush and cold resistant. | |||
| Brass Threaded Tap Connector | |||
 |
£1.91 ex VAT | £2.24 inc VAT | |
| Screws onto a 3/4" threaded tap or 1/2" thread with the adaptor to allow hoses to be attached. | |||
| .Brass Hose End Connector | |||
 |
£2.97 ex VAT | £3.49 inc VAT | |
| Fits to each end of the 1/2" hose to give a simple pull release system for all connectors and tap fittings (most makes now interchangeable) | |||
| Brass Double Tap Y Connector | |||
 |
£10.55 ex VAT | £12.40 inc VAT | |
Fits directly onto a 3/4" threaded tap and allows two hoses to be attached with separate on/off controls |
|||
| Brass Hose Mender | |||
 |
£2.65 ex VAT | £3.11 inc VAT | |
| For repairing damaged hose or permanently joining two lengths of 1/2" hose | |||
| Brass Y Connector | |||
 |
£3.45 ex VAT | £4.05 inc VAT | |
| Allows a single hosepipe to be branched in two directions | |||
| Brass Double Male Connector | |||
 |
£1.54 ex VAT | £1.81 inc VAT | |
| For joining two lengths of hose fitted with end connectors. | |||
HOZELOCK HOSE FITTINGS. |
|||
| A range of System 2 quick connect fittings for 13mm (1/2”) hose (interchangeable with all Hozelock and alternative systems | |||
| 2175 Threaded Tap Connector | |||
 |
£2.56 ex VAT | £3.01 inc VAT | |
| £23.72 (10) | £27.87 inc VAT | ||
| For threaded taps with a 21mm (1/2") or 26.5mm (3/4") thread | |||
| 2176 Round Tap Connector | |||
 |
£4.09 ex VAT | £4.81 inc VAT | |
| £37.90 (10) | £44.53 inc VAT | ||
| For most round & oval taps with an outside diameter up to 18mm (0.75") | |||
| 2177 Round Mixer Tap Connector | |||
|
£4.79 ex VAT | £5.63 inc VAT | |
| £44.37 (10) | £52.13 inc VAT | ||
| Fits round and mixer taps with diameter up to 24mm (1") | |||
| 2274 Multi Tap Connector | |||
 |
£6.73 ex VAT | £7.91 inc VAT | |
| £62.41 (10) | £73.33 inc VAT | ||
| Designed to fit a wide variety of square, round & mixer taps up to 43mm high by 35mm wide complete with a choice of sealing washers | |||
| 2155 Dual Tap Connector | |||
 |
£7.23 ex VAT | £8.50 inc VAT | |
| £31.83 (5) | £39.34 inc VAT | ||
| Has 4 switchable positions which allows 2 hoses to be connected to a tap, one or both hoses can be selected and there is an off position. Has connection for threaded tap. | |||
| 2166 13mm Hose End Connector | |||
 |
£2.63 ex VAT | £3.09 inc VAT | |
| £24.40 (10) | £28.67 inc VAT | ||
| Fits to each end of the hose to give a simple pull release system for all connectors and tap fittings (most makes now interchangeable) | |||
| 2185 13mm Waterstop Connector | |||
 |
£3.56 ex VAT | £4.18 inc VAT | |
| £32.79 (10) | £38.53 inc VAT | ||
| Fitted to outlet end of the hose to allow accessories to be changed without the need to turn off the tap, as water stops when disconnected | |||
| 2100 Hose Repair Connector | |||
 |
£1.80 ex VAT | £2.12 inc VAT | |
| £16.68 (10) | £19.60 inc VAT | ||
| For repairing damaged hose or permanently joining two lengths of hose | |||
| 2291 Double Male Connector | |||
 |
£1.80 ex VAT | £2.12 inc VAT | |
| £16.68 (10) | £19.60 inc VAT | ||
| For joining two lengths of hose fitted with end connectors. | |||
| 2170 Flat Hose Adapter | |||
| £2.80 ex VAT | £3.29 inc VAT | ||
 |
£25.65 (10) | £30.14 inc VAT | |
| Converts flat hose with female thread to “System 2” or “System 2” to 3/4” BSP male thread | |||
| Gardena 1210 Twin Tap Connector £10.78 ex VAT | xxxxxxxxxxxxxxxxxxxx | xxxxxxxxxx | |
|---|---|---|---|
 |
For operating two watering accessories, flow can be adjusted or shut off. Fits directly on to taps with a 26.5 or 33.3mm thread | £12.67 inc VAT | |
.
 |
|
 |
To Hose Fittings |