A quick fit range of hose couplers used extensively by the professional horticultural trades. Made from brass this completely interchangeable range covers a wide range of situations. The hosetail fittings fit directly inside the hose and the male and female fittings have BSP threads (suitable for most garden taps, etc.). A simple twist joins the hose securely to it's other coupling. (widely known as Geka or Renus style fittings). Simple twist coupling (Geka/Renus) for 1/2” and 3/4” hose. Especially effective for use with long lengths of hose and high pressure situations.

Hosetail ½” Coupling

£1.39 ex VAT   £1.67 inc VAT   Quantity

Simple twist coupling (Geka style) for 1/2” hose. High quality brass fitting with barbed internal fitting to 1/2" hose.

Hosetail ¾”

£1.54 ex VAT    £1.85 inc VAT  Quantity

Brass Snap Coupling. Simple twist coupling (Geka style) for 3/4” hose

Male ½” Coupling

£1.44 ex VAT    £1.73 inc VAT  Quantity

Simple twist coupling (Geka style) for 1/2” and 3/4” hose connects to fittings that accept a 1/2" BSP male thread.

Male ¾” Coupling

£1.49 ex VAT   £1.79 inc VAT  Quantity

Simple twist coupling (Geka style) for 1/2” and 3/4” hose connects to fittings that accept a 3/4" BSP male thread.

Male 1" Coupling

£1.69 ex VAT   £2.03 inc VAT  Quantity

Simple twist coupling (Geka style) for 1/2” and 3/4” hose connects to fittings that accept a 1" BSP male thread.

Female 1/2”Coupling

£1.49 ex VAT   £1.79 inc VAT  Quantity

 

Simple twist coupling (Geka style) for 1/2” and 3/4” hose connects to fittings that accept a 1/2" BSP female thread.

Female ¾” Coupling

£1.68 ex VAT    £2.02 inc VAT Quantity

Simple twist coupling (Geka style) for 1/2” and 3/4” hose connects to fittings that accept a 3/4" BSP female thread.

Compression Fitting for 1/2" Hose

£3.73 ex VAT   £4.48 inc VAT Quantity

Simple twist coupling (Geka style) for 1/2” hose . Quantity Geka style fitting that fits to the outside of a 1/2" hose

Blanking Cap

£1.68 ex VAT £1.10 inc VAT Quantity

Geka style blanking caps.Just twist into place to seal the end of the hose or other fitting.

Replacement Washers (10)

£1.68 ex VAT £1.80 inc VAT Quantity

Pack (10) Replacement rubber washer for Geka/Renus twist style hose couplings (above range)

Compatible with most 1/2” interchangeable hose fittings these brass fittings are more crush and cold resistant.

Brass Threaded Tap Connector

£1.91 ex VAT £2.29 inc VAT Quantity

Screws onto a 3/4" threaded tap or 1/2" thread with the adaptor to allow hoses to be attached.

Brass Snap/Click Converters

£1.27 each ex VAT   £1.52 inc VAT  Quantity Choose Size 1/2 inch 3/4 inch

1/2" ½" male thread to click connector. Use in conjuction with female ½" snap coupling to convert from "Geka style" to "Hozelock style fittings)
3/4" ¾" male thread to click connector. Use in conjuction with female ¾" snap coupling to convert from "Geka style" to "Hozelock style fittings)

Brass Hose End Connector

£3.15 ex VAT   £3.78 inc VAT  Quantity

Fits to each end of the 1/2" hose to give a simple pull release system for all connectors and tap fittings (most makes now interchangeable)

Brass Double Tap Y Connector

£10.55 ex VAT    £12.66 inc VAT  Quantity

Fits directly onto a 3/4" threaded tap and allows two hoses to be attached with separate on/off controls

Brass Hose Mender

£2.80 ex VAT   £3.36 inc VAT  Quantity

For repairing damaged hose or permanently joining two lengths of 1/2" hose

Brass Y Connector

£3.45 ex VAT   £4.14 inc VAT  Quantity

Allows a single hosepipe to be branched in two directions

Brass Double Male Connector

£1.54 ex VAT   £1.85 inc VAT  Quantity

For joining two lengths of hose fitted with end connectors.